Support for Enercharge motorcycle battery charger

Compatible with 12V lead-acid batteries (MF, AGM) and LiFePO₄ batteries. Not suitable for GEL, EFB, Deep Cycle, NiMH, NiCd, or non-rechargeable batteries.

It is optimized for motorcycles. For cars, charging will take longer, and compatibility should be checked beforehand.

Of course! ENERCHARGE is perfect for maintaining battery charge in all weather conditions, especially in winter, thanks to automatic current adjustment at low temperatures.

No, it is fully automatic: it recognizes the battery and manages the charging cycle without manual settings.

Connect the clamps: red to the positive terminal and black to the negative terminal. Then connect the control unit via USB-C.

The LED turns solid green: this means the battery is fully charged and maintained.

It signals a defective or deeply discharged battery. Disconnect the device immediately and perform a technical check on the battery.

It signals a defective or deeply discharged battery. Disconnect the device immediately and perform a technical check on the battery.

A 40W power supply is recommended for optimal charging times.

ENERCHARGE automatically switches to maintenance mode to prevent overcharging.

Yes, but only if it is powered. Do not leave it connected to the battery without input power to avoid discharging the motorcycle battery.

Yes, the package includes ENERCHARGE and the battery connection cable.

Yes: against reverse polarity, short circuits, and overcharging.

Yes, but in a well-ventilated area and away from flammable materials.

No. Do not immerse or expose it to liquids or moisture.

None. Just keep it clean with a dry, anti-static cloth.